Photosensors
The FSP60 series was designed for extreme environmental conditions such as: B. developed in the paper industry:
- The extremely high light output offers maximum reserves against contamination, even with long fiber optics
- The sensor is effectively protected from harsh environmental influences such as vapors, dust, etc. by a robust housing
- in combination with fiber optic optics, it is ideal for use at high temperatures
- Contamination control via intensity display on the sensor housing or via an analog intensity signal
The photo sensors are available in 24VDC / 115VAC / 230VAC versions, plug or cable connection and with different outputs (transistor, relay, analog). Please see the data sheets below for further details.
FSP60 sensors can be used on their own as reflex sensors, or in conjunction with suitable fiber optics fiber optic light scanner or fiber optic light barrier.
Technical data | FSP60 series (depending on type) |
---|---|
Pollution control | Intensity display / analogue signal / FR signal * |
Operating Voltage | 24VDC / 115VAC / 230VAC |
outputs | 2x transistor / changeover relay / relay; opt. 4-20mA |
Connection | Terminals/plugs |
Switching frequency | 15Hz/1kHz/5kHz |
switching distance | to 6 m |
* … contamination alarm signal: changeover relay (WR) or PNP |
Advantages:
- high switching distance: up to 2,2 m or 5 m (with/without fiber optics)
- high pollution reserve
- expanded pollution monitoring options
- particularly robust
- Variety of configurations
- predestined for use with fiber optics
Application examples:
- Tear detection in paper machines